How compatible are Go-Kreate dies ?
A. All our dies are made to the same specification as the brand leaders.
What machines do they work on ?
A. This depends on the adapter used and the physical size of the die.
Quickutz
Hand tool - original & Squeeze
All our 50mm x 50mm dies will fit the Hand tools without any additional adapters. This includes all the alphabets, however the Quickutz hand tool only cuts near to the center of the cutting plate and you may need to move th die around to get the best cut.
Revolution
All our dies will fit the revolution without any need for additional adapters.
Sizzix
Hand tool - original
All our current dies will fit the original (lever action) machine. They will need to sit on an adapter plate (500001) or in the case of the 50mm x 50mm dies on a Sizzix adapter plate (38-9710). In both these instances the Sizzix machine will need to be fitted with a system converter (38-9000) as well.
SideKick
All our current dies will fit the Sidekick machine except S.Large & V.Large. They will need to sit on an adapter plate (500001) or in the case of the 50mm x 50mm dies on a Sizzix adapter plate (38-9710).
BigKick
All our current dies will fit the Bigkick machine. They will need to sit on an adapter plate (500001) or in the case of the 50mm x 50mm dies on a Sizzix adapter plate (38-9710). If your Bigkick has a multi platform no other adapters will be needed.
Ellison Design
Tag-a-long
All our current dies will fit the Tag-a-long machine except S.Large & V.Large. They will need to sit on an adapter plate (500001) or in the case of the 50mm x 50mm dies on a Sizzix adapter plate (38-9710).
Big Shot
All our current dies will fit the Big Shot machine. They will need to sit on an adapter plate (500001) or in the case of the 50mm x 50mm dies on a Sizzix adapter plate (38-9710). If your Big Shot has a multi platform no other adapters will be needed.
Spellbinders
Wizard
All our current dies will fit the Wizard machine. They are the same Thickness / Tolerance as Wizard dies and as such you do not need any other spacer / adapter plates than are supplied with the machine.
Provocraft
Cuttlebug
All our current dies will fit the Cuttlebug machine. If you have all the plates with your machine you will need a sandwich of 'A'plate + 'C'plate + paper + 'B'plate.
Otherwise they will need to sit on an adapter plate (500001) or in the case of S.Large & V.Large adapter plate 500002 and then use the normal cutting pads.
Accucut
Zip eMate
All our current dies will fit the Zip eMate machine. Our dies are the same thickness as Zip eSlim metal dies and therefore require no additional adapters.
Please Note :-
Quickutz, Squeeze, Revolution are all trademarks of Quickutz Inc.
Sizzix, Ellison, Sidekick, Big kick, Tag-a-long, Big Shot are all trademarks
of Ellison Educational Equipment inc.
Spellbinder & Wizard are trademarks of Spellbinders Paper Arts inc
Provocraft & Cuttlebug are trademarks of Provocraft inc
[ekm]373x150[ekm].jpg)
